Router Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi to everyone, hope you are all well.

I have just bought the Makita 195563-0 plunge base for my Makita, corded, trimming router the RT0700 and just in case this may affect any outcome with answers I am in the UK.
I need to get guide bushes so I can use my trend hinge jig and various other jigs so my question is: -

Which part number for the guide bush do I need that will fit the Makita 195563-0 plunge base directly for say a 16mm and 30mm guide bush??
Or - Any other make of guide bush that fits directly?

I have come across various Makita made guide bushes of all sizes but not anywhere can i find what the actual diameter of the unit is? just the outside diameter of the bush itself and not the plate it is attached to. I believe the circular hole in the plunge base, on measuring with a tape, is 68mm in diameter but again this information I cannot find anywhere even on the Makita website.

Apologies for being long winded and thanks in advance for any answers:smile:
 

·
Registered
Joined
·
8,956 Posts
Hi to everyone, hope you are all well.

I have just bought the Makita 195563-0 plunge base for my Makita, corded, trimming router the RT0700 and just in case this may affect any outcome with answers I am in the UK.
I need to get guide bushes so I can use my trend hinge jig and various other jigs so my question is: -

Which part number for the guide bush do I need that will fit the Makita 195563-0 plunge base directly for say a 16mm and 30mm guide bush??
Or - Any other make of guide bush that fits directly?

I have come across various Makita made guide bushes of all sizes but not anywhere can i find what the actual diameter of the unit is? just the outside diameter of the bush itself and not the plate it is attached to. I believe the circular hole in the plunge base, on measuring with a tape, is 68mm in diameter but again this information I cannot find anywhere even on the Makita website.

Apologies for being long winded and thanks in advance for any answers:smile:

If this is the base you have then the standard Porter Cable template bushings should fit.
They can be bought in sets or individually. I don't know if this link helps.

https://www.routerforums.com/guide-bushings-templates/29012-metric-guide-bushes-p-c.html

https://www.amazon.com/Router-Templ...ix=METRIC+router+guide+bushing,aps,228&sr=8-2
HErb
 

Attachments

  • 125.7 KB Views: 259
1 - 4 of 4 Posts
Top