Router Forums banner
1 - 1 of 7 Posts

· Registered
2,046 Posts
Nathan I would strongly suggest reading over the safety information on the use of routers, the proper feed direction, speed settings for different sized bits, and so on. Some serious injury and damage can be done if ignorant to such facts. Keep in mind some bits were never intended for hand held router use and were intended for router table setups. Just because it fits in the collet doesn't mean it can be used or should be used by hand held routers. Read up before finding yourself in trouble........
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.