Router Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
I just purchased a brand new Router crafter in the original box. Seller stated it was all there but I found that the only thing missing was the crank. I know they aren't available but I can usually make almost anything from scratch if I know what its suppose to look like and have some dimensions. Is there anyone out there that could take a digital phot of theirs and either include a measuring scale in the photo or provide some detailed measurments so I can reproduct one.
If and when I get a response I can provide the host with my email if an attachment doesn't conform to policy.:fie:
 

·
Registered
Joined
·
23,786 Posts
Hi Lowell

It's a easy fix, just use some dowel rod and sq.up one end with the band saw and a file, so it fits in the sq.drive, (Press fit) I gave it a little bit more support and a way to lock it in place. :)
It can be any size you want it to be....

see below

I just purchased a brand new Router crafter in the original box. Seller stated it was all there but I found that the only thing missing was the crank. I know they aren't available but I can usually make almost anything from scratch if I know what its suppose to look like and have some dimensions. Is there anyone out there that could take a digital phot of theirs and either include a measuring scale in the photo or provide some detailed measurments so I can reproduct one.
If and when I get a response I can provide the host with my email if an attachment doesn't conform to policy.:fie:
 

Attachments

·
Registered
Joined
·
10,671 Posts
Greetings and welcome to the router forum. Thank you for joining us, and remember to have fun, build well and above all be safe.
 

·
Registered
Joined
·
37 Posts
hi Lowell,
A 1/2 in socket wrench or extension will also work although, it won't stay in place between adjustments.
Have fun!,
Hilbilly
 
1 - 4 of 4 Posts
Top