Router Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
310 Posts
Pretty neat, did you put the track in the original table yourself?
I'm a little surprised that they did not include the threaded inserts in the kit.

I see that the XY upgrade needs a track which I would have to add to my original setup.

Like you said, don't need 'em very often but either upgrade would be worthwhile when you do.
 

·
Registered
Joined
·
310 Posts
How would the geometry, ie pivot point relative to the quadrants, be affected if the threaded inserts were installed below the original table into a beefier applied cleat?
I suspect that 45 degree might be affected.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top