Joined
·
31,266 Posts
somebody used pledge on the table or the like and the table is contaminated w/ silicone...
the silicone is now in the wood fibers...
the fine sanding isn't helping you here... it's closing the cells..
drop back to 120.. then start w/ finding out which solvent is going to work to get the silicone out of the wood's...
washing w/ solvent should have been step #1...
too fine of a sanding w/ set you back too...
stop at around a 120 grit to leave the pores open and something for the finish to grip...
progressive fine(er) sanding(s) is done between coats of top coat...
Note:sanding too fine from the get go will contribute tremendously to your problems...
..
the silicone is now in the wood fibers...
the fine sanding isn't helping you here... it's closing the cells..
drop back to 120.. then start w/ finding out which solvent is going to work to get the silicone out of the wood's...
washing w/ solvent should have been step #1...
too fine of a sanding w/ set you back too...
stop at around a 120 grit to leave the pores open and something for the finish to grip...
progressive fine(er) sanding(s) is done between coats of top coat...
Note:sanding too fine from the get go will contribute tremendously to your problems...
..
