Router Forums banner

mortise and tenon system

3393 Views 1 Reply 2 Participants Last post by  Woodnut65
i went to purchase the m/t sys from oak park but it is not available. i espeacially like the slot cutter which gives a full !" tenon in one pass. is it possible to purchase just the slot cutter. if possible an exact part # would be great as i have been looking but cannot find any large enough to get a 1" deep tenon thanks
1 - 2 of 2 Posts
Hi Kellyp: I was also looking at the mortice tenon system at Oak Park. I suspect
that they may be making some changes to it. Th draw back that the system had
as far as I could see is the system only makes 1/4" thick tenons. You could send them an E-mail or call the 800 number.

Woodnut65
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top