Router Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hello all! My wife and I got into the cnc woodworking business just a little while ago, and bought a third hand Multitech 1313 4' x 4' wood routing cnc machine. It's worked fine until just a few weeks ago. Long story short, it started cutting outside of its programming and while troubleshooting I inadvertently reset my Weihong NK105 G2 controller back to its default factory settings without backing up my settings onto any storage device. Honestly thought I was rebooting it like a hard reboot on a phone. I identified the likely cause of its cutting issue, which was mechanical in nature. I haven't the first clue on how to re-enter the settings for the machine set up as was done in the factory before shipping. I have reached out to the former owner who did not have any saved settings, and have also reached out to the manufacturer in China who said they would try to send me the settings, but I've been waiting for over two weeks now with no reply. It's beginning to hold up production now.

Does anyone by chance have a similar machine, who would be kind enough to send me the settings that I could upload and test to ensure it was in fact the mechanical issue I found and that the controller isn't the issue?

Thanks in advance for any help!
 

·
Registered
Joined
·
5 Posts
Hello all! My wife and I got into the cnc woodworking business just a little while ago, and bought a third hand Multitech 1313 4' x 4' wood routing cnc machine. It's worked fine until just a few weeks ago. Long story short, it started cutting outside of its programming and while troubleshooting I inadvertently reset my Weihong NK105 G2 controller back to its default factory settings without backing up my settings onto any storage device. Honestly thought I was rebooting it like a hard reboot on a phone. I identified the likely cause of its cutting issue, which was mechanical in nature. I haven't the first clue on how to re-enter the settings for the machine set up as was done in the factory before shipping. I have reached out to the former owner who did not have any saved settings, and have also reached out to the manufacturer in China who said they would try to send me the settings, but I've been waiting for over two weeks now with no reply. It's beginning to hold up production now.

Does anyone by chance have a similar machine, who would be kind enough to send me the settings that I could upload and test to ensure it was in fact the mechanical issue I found and that the controller isn't the issue?

Thanks in advance for any help!
I had a similar issue by thinking I was only just "Backing up" lost all my settings. I have a computer Fundi who I contacted & he sorted it out by going into my settings, as he said that all the details were still in my computer. It's worth a try!
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
I had a similar issue by thinking I was only just "Backing up" lost all my settings. I have a computer Fundi who I contacted & he sorted it out by going into my settings, as he said that all the details were still in my computer. It's worth a try!
Who and what is a Fundi? Lol! I’d love some contact info if you have any to reach someone like a Fundi that can help us out!
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top