Router Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
189 Posts
Discussion Starter · #1 ·
This is my attempt at an entertainment center. Materials were 3/4 oak plywood. I rip oak stock for trim on the plywood. Used glue and masking tape, really amazed how good it bonded. I need lots pratice on staining wood putty. All sanding was done by hand. I plan to make two drawers between the top speakers. I Decided to box the surround speakers in and was quite surprise with the sound. It also weighs a ton.

Ent1.jpg

Ent2.jpg

Ent3.jpg
 

·
Registered
Joined
·
10,671 Posts
Very good Berry, that looks to be a sizeable project especially for hand sanding. What did you use for the finish?
 

·
Registered
Joined
·
550 Posts
Here I am thinking about a little box of some kind for a first project and you go and build a big entertainment center, nice thanks :p

I like how the plywood was edged, learned something new.
 

·
Registered
Joined
·
189 Posts
Discussion Starter · #4 ·
Very good Berry, that looks to be a sizeable project especially for hand sanding. What did you use for the finish?
I used (Min-wax Brand) Clasic Oak 2 in 1 stain & sealer Satin finish. Applied by foam brush. On my next project I used seperate stain & sealer and found that I like using the seperate better than the 2 in 1.

PS. After the second project I purchased a sander:happy:
 
1 - 4 of 4 Posts
Top