Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
22,488 Posts
It's not very long for a workbench, unless you don't have room. My space is a bit limited, so mine is 60 inches long, which is just adequate. I also made a hinged top that allows me to add 20 extra inches to the width of the bench. It folds down and is supported by a couple of legs with leveling screws on the bottom. Be sure to set the height to match your table saw a and other tools. That really helps support long pieces during your cut.
396289
+
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top