Router Forums banner

My Introductions

1324 Views 3 Replies 4 Participants Last post by  Dr.Zook
you say the router bit trunes clockwies

when you set it in table how do you know the right way?
1 - 4 of 4 Posts
Hi Bob

When you use your router in the router table it's now turning counter clockwise because it's mounted up side down.

The norm, if you stand in front of your router table with the fence in the back you would move the stock to the left.
The bit turning will try and push/hold the stock into the fence or to the back of the router table.
Into the Safety Guide Pins
Bj :)
Hey, welcome to RouterForums!
Hi Bob. Welcome to the forums.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.