Router Forums banner
1 - 1 of 48 Posts

· Registered
3,960 Posts
Bad time for the controller to go down right at the beginning of the semester.

Could just be dirty contacts in the E-Stop button from sitting for a long time and then reactivating the machine might have caused the error codes. The E-Stop might have been triggered during the move and when reset might not be making good contact electrically.

Hopefully Len can get you back up and running quickly.
1 - 1 of 48 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.