[howy123]

Hi people.
I'm wiring a ddcs expert /M350 to a Chinese H100 110v 1.5kw vfd . I've scoured the interwebs but nothing useful. If anyone could help . And do it like I'm 7 or so yrs old because I'm a bit burnt. Posting some pics of issues. So controller has on spindle connection ACM, PWM, VSO,COM-, FOR. The vfd side has 485+,485-, A0, Gnd,
X4,X5 , X6/Y1_FO,
P12, A11, A12, gnd, X1,X2,X3. All info i have is on pics u might have to zoom.
Thanks so much.

 

[howy123]

You shouldn't be talking about connecting the DDCS expert to the H100 VFD YET
because I don't think the DDCS expert can run your Queen Bee pro cnc since the DDCS cannot support 2 motors for 1 axis and your your Queen Bee pro cnc has 2 stepper motors on the X-axis.

just going to use a jumper cable on y axis to run both stepper drivers

 

[howy123]

was going to use alarm on closed loop steppers for limit.

 

[howy123]

i do have a mach3 controller just wanted to be offline

 

[howy123]

Thanks so much. Ill; post how things work out