Router Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Can anyone give me fairly detailed instructions for removing the springs from this router. I installed it in my router table, and have to call 2 buddies over to hold the top plate down while I try to powerlift the router up. Any help would be appreciated. Thanks.
 

·
Registered
Joined
·
23,786 Posts
Hi Chuck

I have NOT remove the springs from a King Canada plunge router BUT many routers come with a parts break down in the user guide manual, you can use that to help you remove the roll pins the norm or lock nut to remove the springs.

here's a show and tell for some of them but it will not show the King Canada but many of the routers are made the same way.
http://www.routerworkshop.com/mark1.html?list=ME05--

Bj :)
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top