Router Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
39 Posts
Discussion Starter #1
I'm using the Skil bench-top RAS900 router table and need the 3 ring inserts for the mounting plate.
Item 11 in the manual, with different opening diameters..
Bosh made the table, sold to new Skil company. Neither seem to stock or make these anymore.
Your suggestions please. Thanks
 

·
Premium Member
Retired since June 2000
Joined
·
14,983 Posts
The two on the left I routed from Acrylics using a router circle jig. The shims were of course because the Acrylic was slightly thinner than the original two on the right. I have, recently posted the making of a simple circle jig.
 

Attachments

·
Registered
Joined
·
39 Posts
Discussion Starter #3
The two on the left I routed from Acrylics using a router circle jig. The shims were of course because the Acrylic was slightly thinner than the original two on the right. I have, recently posted the making of a simple circle jig.
Thanks Harry. I'm curious about a jig that cuts circles only about 3 inches across.
Never got to W Australia, but hitched around Victoria, Queensland, NSW and S A.
Many Thanks to all who were so kind that year.
 
1 - 4 of 4 Posts
Top