Router Forums banner
1 - 1 of 9 Posts

· Registered
Joined
·
936 Posts
About 1/8" increments. Set speed based on bit diameter. To help get the exact width you could use an auxilliary fence clamped to the main fence. Set the main fench to final depth. Install the auxilliary fence and take a pass, remove the auxilliary fence and take final pass.
Get some bit and blade cleaner....I get CMT.....it's biodegradeable.
Get a diamond sharpening card to do an ocassional touch up.
 
1 - 1 of 9 Posts
Top