[roofner]

Here is my new computer center not totally finished. I did not have much floor space so design to go up. Built with 3 2o inch by six foot handy panels .
That idea came from MT Stringer. Saves a lot of glue up and uses solid wood. Here is my picture.

 

[roofner]

Shelves are 2x stock through bolted with 1/2 carriage bolts mdf on top. No wobble at all . You could stand on the shelves. and they will not deform. plus the face frames are pocket holed between sides

 

[roofner]

I've ordered a power surge multi port to fix wiring rats nest. Next going to make a pantry out of a couple more of those handy panels.
Thanks for all the kind remarks. Then get a back put on maybe drawers in bottom right side.

 

[roofner]

Here almost complete. I made 3 drawers as someone had suggested. I need to put poly on the drawers. After poly is applied need hardware put on the drawers and put a back on the case. Here is latest picture

 

[roofner]

Here almost complete. I made 3 drawers as someone had suggested. I need to put poly on the drawers. After poly is applied need hardware put on the drawers and put a back on the case. Here is latest picture .