Router Forums banner

New to forum

1117 Views 4 Replies 5 Participants Last post by  Mark
Thanks for thsi forum. I am new to using the router but not to wookworking. I hope to learn much from here. I have a Dewalt 3hp plundge router attached to a router table that has a Jointech system hooked to it.

Thepaintman
Jerry Miller
1 - 5 of 5 Posts
Welcome to the Router Forums Jerry. This is the "goodest" place to learn.
Hi Jerry, if it's plunge routing that you are interested in, make sure that you follow ALL of Template Toms threads and posts, here in Western Australia he is considered to be the master of routing with particular emphasis on plunge routing using template guides and as an ex student of his I have no hesitation in promoting his very successful methods. Once learned you will be capable of doing things with the plunge router that you never dreamed of. Good luck, Harry
Welcome to the forums Jerry. As you are prowsing please take a few minutes to read the blogs. Members spend a fair amount of their time posing questions and providing good information. My blog is called Sawdust Dreams. Please leave comments so we know how we are doing.
Welcome to the RouterForums.com community!
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top