New to Me Shark Pro Plus HD

2579 Views 10 Replies 7 Participants Last post by Pro4824, Mar 16, 2019

gdonham1

Discussion Starter · Mar 15, 2019

I purchased a used Shark Pro Plus HD CNC Router. I have been setting it up for a couple of weeks and have been able to cut a few downloaded projects. I bought a refurbished Dell Optiplex 745, two 19 inch monitors, keyboard and mouse from Ebay. I got a kiosk from Habit for Humanity Restore in Nacgodoches Texas for the computer. I also bought a new Bosch router because the original one sounded like a thrashing machine. I got a billet router mount from Dixie Billet. The original owner had smeared caulk or some type of adhesive all over the router to keep the router from spinning in the mount.

I have cut a few downloaded projects and they have turned out very well. My start up costs have been quite high, which I expected. I got a composition book from Staples and am keeping a log of everything that I do. I like to keep a record so I can look back and correct mistakes or see what worked.

Here are the pictures of my set up and the Vetric Dual Candy Dish Lids I cut out earlier this evening.

Let me know what you think.

I have downloaded and got a start up license from Fusion 360. I also downloaded trials of MeshCAM and Vcarve Desktop. I need to concentrate on the CAM/CAD program I will be using but wanted to try out a few. I also got free copies of Carbide Create and Easel was well as FreeCAM. I also got Inkscape and have liked using that to import bit maps, trace them and turn them into SVG files. Google has so many free images it is hard to stop looking.

I will try out the trials but since Fusion 360 is so loaded and so many tutorial I think I will concentrate on it. I cannot beat the price of free with a startup license but the learning curve is quite steep. I have watched youtube videos over and over and the concepts are starting to come together in my head. I just hope that all of the new information coming into the front of my brain does not push out the old stuff like talking and walking.

See less See more

Save

Reactions: 5

1 - 11 of 11 Posts

difalkner

· #2 · Mar 15, 2019

Well done, Guy! Let the fun and creativity begin.

I use Fusion 360 for my CAD/CAM work - good program.

David

Save

Danman1957

· #3 · Mar 15, 2019

Lately I have been thinking of taking the plunge into CNC but it is very expensive. I think it would add a feature maker to my shop that would allow me to make nice signs and possibly carve some parts on furniture projects. A local woodworking store sent e-mails this week promoting 2 units, a desktop and a 20 x 24. The difference in price is substantial and I don't think the desktop is big enough. From apx. $1800 to over $7000 for these units.

Save

gdonham1

Discussion Starter · #4 · Mar 15, 2019

Normally I would not discuss money but this forum is about sharing and knowledge. I knew the CNC Router would just be the start of expenses the costs can spiral out of control. For my expenses they do not include software, which can be half the cost of the CNC Router, because I got a startup license from Fusion 360.

So I could have went cheap but I did get a dedicated computer (used) because I did not want my laptop in the dusty environment of the shop. My laptop has my digital life on it and the shop is no place for it. Also I could have scrounged up a few other parts but basically I could not have gone a lot cheaper if I wanted to have a CNC Router and operate it.

My goal for the CNC Router is to embellish my existing work on boxes and other analog made projects. I have seen on forums people think they can make boxes or other projects strictly on the CNC Router. Also good advise for getting a CNC Router is not to buy and see if you have a purpose for it, rather have a purpose for it and then buy it. That may seem simple but in my search to buy I found plenty of people that bought a CNC Router, played around with it and never or hardly ever made anything. HAVE A PURPOSE FOR IT BEFORE BUYING!

Here is a break down of my costs so far.

Costs for the Shark Pro Plus HD
$2000.00 Cost of Shark Pro Plus HD
$47.59 1/4” Down spiral Router Bit and 1/4” Up Spiral bit (Lowes)
$19.98 USB A Extension Cord (Staples)
$2.98 Log book (Staples)
$0.50 Shark Mouse Pad (Staples)
$10.80 Moving Blankets (Covers) (Harbor Freight Tools)
$7.95 Super Lube with PTFE (Amazon)
$32.46 Computer Stand (Habitat for Humanity Restore)
$99.00 Touch Plate (NWA)
$19.99 Puck Jig Stock 12 Pack (NWA)
$35.00 Router Clamp (NWA)
$99.00 Gantry Upgrade Kit (NWA)
$82.25 Aluminum Router Clamp (Dixie Billet)
$143.01 Bosch 1617EVS Router (Amazon)
$155.95 Frued Router Bit Set (Amazon)
$32.99 Vivo Dual Monitor Stand (Amazon)
$202.83 Dell Computer, 2 Monitors, Keyboard and Mouse (Ebay)
$39.12 Sheet of 3/4” MDF (Covington)
$29.84 1/4-20 Bolts and Nuts (Deans Hardware)
$23.82 1/4-20 Bolts and Nuts (Ace Hardware)
$23.27 1/4-20 Nylon Bolts and Nuts (Ace Hardware)
$21.64 Wireless Keyboard and Mouse (Staples)
$20.90 2.5” Clear Dust Hose 10’ (Amazon)
$28.99 90 Degree Positioning Square 4.7” x 4.7” (Amazon)

______________________________________
$3179.86 As of March 11, 2019

See less See more

Save

Gaffboat

· #5 · Mar 15, 2019

David (difalkner) is a Fusion 360 fan, and makes some great stuff with it. I’ve tested Carbide Create and Easel, and I don’t think they can hold a candle to what you can accomplish with Vectric’s V Carve. Inkscape is a full-featured vector design program that will serve you well. I’ve used Adobe Illustrator as my major vector art program for years, but I find I can create most of my vector art easily with V Carve, as well as create the tool paths, followed by sending the cutting files to my Shark HD. Have fun!

Save

Reactions: 3

Gaffboat

· #6 · Mar 15, 2019

gdonham1 said:
Normally I would not discuss money but this forum is about sharing and knowledge. I knew the CNC Router would just be the start of expenses the costs can spiral out of control. For my expenses they do not include software, which can be half the cost of the CNC Router, because I got a startup license from Fusion 360.

So I could have went cheap but I did get a dedicated computer (used) because I did not want my laptop in the dusty environment of the shop. My laptop has my digital life on it and the shop is no place for it. Also I could have scrounged up a few other parts but basically I could not have gone a lot cheaper if I wanted to have a CNC Router and operate it.

My goal for the CNC Router is to embellish my existing work on boxes and other analog made projects. I have seen on forums people think they can make boxes or other projects strictly on the CNC Router. Also good advise for getting a CNC Router is not to buy and see if you have a purpose for it, rather have a purpose for it and then buy it. That may seem simple but in my search to buy I found plenty of people that bought a CNC Router, played around with it and never or hardly ever made anything. HAVE A PURPOSE FOR IT BEFORE BUYING!

Here is a break down of my costs so far.

$3179.86 As of March 11, 2019

I've never totaled up how much I've spent on my CNC, but I've invested a lot on bits alone. Then you add the cost of experimenting with various hold down clamps, touch plates, dust collection, and ... well, you get the picture. It adds up fast (and I'm not I sure I really want to know). But I know all my CNC purchases pale in comparison to my wife's quilting stuff. A cautionary tale for married men: Never encourage your wife to take up quilting unless you have won a major lottery. :wink:

Save

Reactions: 3

Scottart

· #7 · Mar 15, 2019

gdonham1 said:
I purchased a used Shark Pro Plus HD CNC Router. I have been setting it up for a couple of weeks and have been able to cut a few downloaded projects. I bought a refurbished Dell Optiplex 745, two 19 inch monitors, keyboard and mouse from Ebay. I got a kiosk from Habit for Humanity Restore in Nacgodoches Texas for the computer. I also bought a new Bosch router because the original one sounded like a thrashing machine. I got a billet router mount from Dixie Billet. The original owner had smeared caulk or some type of adhesive all over the router to keep the router from spinning in the mount.

I have cut a few downloaded projects and they have turned out very well. My start up costs have been quite high, which I expected. I got a composition book from Staples and am keeping a log of everything that I do. I like to keep a record so I can look back and correct mistakes or see what worked.

Here are the pictures of my set up and the Vetric Dual Candy Dish Lids I cut out earlier this evening.

Let me know what you think.

I have downloaded and got a start up license from Fusion 360. I also downloaded trials of MeshCAM and Vcarve Desktop. I need to concentrate on the CAM/CAD program I will be using but wanted to try out a few. I also got free copies of Carbide Create and Easel was well as FreeCAM. I also got Inkscape and have liked using that to import bit maps, trace them and turn them into SVG files. Google has so many free images it is hard to stop looking.

I will try out the trials but since Fusion 360 is so loaded and so many tutorial I think I will concentrate on it. I cannot beat the price of free with a startup license but the learning curve is quite steep. I have watched youtube videos over and over and the concepts are starting to come together in my head. I just hope that all of the new information coming into the front of my brain does not push out the old stuff like talking and walking.

I started with a SHark HD. still have it and use it on smaller stuff when the shop is really busy. Love it, made tons of cool stuff with it. enjoy and welcome to the forum

Save

Reactions: 3

gdonham1

Discussion Starter · #8 · Mar 15, 2019

Oh and one more thing that I did not mention above is the TIME. I have spend many long hours setting up the computer, loading software, virus protection, windows updates and downloading the necessary applications. Then there are the hours and hours of watching youtube for the knowledge I need to run the CNC Router.

So from a financial stand point and a time view the investment is substantial. If you are not willing to make either commitment I suggest that you do not take the plunge.

When I was looking for a CNC Router I had placed a wanted ad on craigslist in Dallas and Houston. I never got any bites on that but I did have an interesting email from a person that was trying to get me to join a makers space. If you live in a big enough town for a makers space then you can do your learning on their equipment. Just remember you have to reserve the systems and get your slice of time. The makers space reminds me of my early computer learning going to the computer lab and reserving time on the main frame and getting my slice of resources. So if you want to just dip your toe in the water you can see about makers space. FYI the young people in many of these places think they invented making stuff. It is like when Miley Cyrus got to be 18 and she thought she invented sex. She did not know how she got there in the first place. After all her dad and mom invented sex, oh I mean her grandparents, etc...

See less See more

Save

gdonham1

Discussion Starter · #9 · Mar 15, 2019

I bought a log book and keep it updated with everything I buy and do. I also have a journal in the shop that I update regularly about my general work. I find that it makes a good record and helps me remember what worked and more importantly what did not work. I can print pictures and stick them in the journals with Scotch Restickable Glue Stick so I have a visual record of what I am doing. I have found the journaling very helpful and makes me think about what I am doing and have done.

Save

Reactions: 1

RainMan 2.0

· #10 · Mar 16, 2019

Congrats on your new cnc Guy .I’m liking your setup with the dual monitors . Looks like your getting the hang of things

Save

Pro4824

· #11 · Mar 16, 2019 (Edited)

I'm new to CNC and really enjoy every minute I spend with it. But if I kept up with every $$$$ I've spent and the number of hours spent learning and working with it......... that sure would take all the fun out of it. It's made a couple thousand dollars this year so that only puts me about 4 thousand in the hole!! 😉 enjoy the ride!!! 🙂

Save

Reactions: 4

1 - 11 of 11 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

New to Me Shark Pro Plus HD

gdonham1

Attachments

difalkner

Danman1957

gdonham1

Gaffboat

Gaffboat

Scottart

gdonham1

gdonham1

RainMan 2.0

Pro4824

Top Contributors this Month