Router Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
533 Posts
A- Get a face shield
B- Understand the feed direction.
C- Get a feel for your router by starting with a simple straight bit ¼ or ½ shank and junk wood and do << small passes >> removing no more than 1/8 at a time against a straight edge or something.
D- Note the offset of router bit cut edge to your straight edge.
E- Practice and you’ll be good to go.
 

·
Registered User
Joined
·
2,392 Posts
W e l c o m e . . A b o a r d !!

1. Start watching The Router Workshop... either on TV or on The Woodworking Channel.
2. Get a book or two About Routers.
3. Read this forum and ask questions to get answers.
4. Have fun.
5. Be sure bit is really tightened good before turning on.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top