Router Forums banner


1182 Views 3 Replies 4 Participants Last post by  Cherryville Chuck

I am a complete novice to CNC routing but having some knowledge in CAD I am to be our companies new CNC operator. I'm more than up for the challenge but wanted to know if anyone has ever had any experience of the following...

1. CKJ CNC Machines
2. UCANCAM Software
3. NC Studio

I have been on youtube and the UCANCAM looks fairly straightforward but I couldn't find any tutorial videos on the NC Studio that was in English or with subtitles. Any advice on this or on things to watch out for, things I might need etc. As a complete beginner, this would be very helpful.

Thanks in advance
1 - 4 of 4 Posts
Welcome to the forum Dan.
Welcome aboard.
Welcome Dan. Hopefully some of our CNC gurus will be along soon to help.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.