Router Forums banner
1 - 1 of 13 Posts

· Banned
12,004 Posts
Brandon, I set up a Triton TRA-001 in a Grizzly table and had no issues with it. I use the Grizzly plates for all my routers and have never had one sag; I buy them 6 at a time.

If you use the Triton in the table it is best to remove the plunge spring as shown.


  • Like
Reactions: 197761
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.