Router Forums banner
1 - 9 of 9 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
I inherited a Craftsman planer 351.217130 and would like to know if there is a current model of any planer that parts could be interchanged with. Principally the feed rollers. One of the lift gears was missing and I found some steel Dewalt gears that I made work.

Any help would be greatly appreciated. Thanks in advance.

Gailen
 

·
Registered
Joined
·
2,321 Posts
I've seen a list that showed the manufacturers as a cross reference to the Craftsman model numbers. It's out there somewhere, but I have no idea where to look or what title to search for. Find it, and you will have what you need.

Charley
 

·
Registered
Joined
·
1,829 Posts
I did find a similar list. It shows that the 351 prefix was made by Colovos Co. Now it looks like all they make is clothing. :poop:
Doubt this will help but here is the link to the manual Link here . Seems like you are mechanically inclined with making the dewalt parts work maybe you can make some rollers work.
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #8 ·
Doubt this will help but here is the link to the manual Link here . Seems like you are mechanically inclined with making the dewalt parts work maybe you can make some rollers work.
And when I had the rollers out to clean the machine, I didn't think to take exact specs. Plus most other parts listings don't show the specs.

Gailen
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top