Router Forums banner

Old Bosch 1604 Bearing replacement

1188 Views 1 Reply 2 Participants Last post by  Stick486
Having trouble getting bearing nut off to allow me to release armature and get to the bearing that is squealing.

I can get a wrench on it but then no way to keep the armature etc.. from moving.

Always a trick - hoping someone can clue me in.

1 - 2 of 2 Posts
welcome N/A...
strap wrench to hold the armature shaft....
armature shaft clamped between two blocks of wood..
take note to see if you are dealing w/ a left or right hand thread...
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.