Router Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
23,786 Posts
Discussion Starter #1 (Edited)
One of the best emails I have got from Bob and Rick (Oak-Park)

Way to go guys :) :)

I'm sure all the members will get one also but I think I will post this one because it's that good. :)

******NOTE*******
It's NOT BOB or Rick in the Show and Tell ,this guy has a watch on :) not the norm for Bob or Rick , lets guess who ????

Bj :)
------------------------------
January 25, 2007
Dovetail Joints Using The Mitre Gauge.

Dovetail Joints Using A Mitre Gauge!
The Oak Park Mitre Gauge system is used in conjuction with a table mounted router to make a variety of wood joints. Today we will focus on dovetail joining a table rail to a square leg post both at a 90 degree and 45 degree angle.

http://cmpgnr.com/r.html?c=875875&r...routerworkshop.com/clampmtgauge.html&g=0&f=-1

Bj :)
 

·
Registered
Joined
·
23,786 Posts
Discussion Starter #3
Hi Joe

I know Rick pulls it all off and has a small box for them and he makes a point about them on just about every show they make, I don't recall seeing a ring on Bob's finger but I think is he clean also and I'm sure Rick got that from his dad.
The guy in the show and tell is hvy.set looks like about 200lbs. or so with a black tee shirt and I don't recall seeing Bob or Rick in a tee shirt. :)

Bj :)
 
1 - 3 of 3 Posts
Top