Joined
·
139 Posts
Sand the blocks. Spray on some shellac 2 coats let them dry last coat at least a few hours and then carve and paint them with acrylic paint. Lightly sand and they come out really crisp. Blow them off and spray a clear coat over them.
Also I have used sanding them, spray shellac, then let that dry and then carve them and then color them in with sharpie and then wipe them off with some denatured alcohol and then seal with finish.
Also I have used sanding them, spray shellac, then let that dry and then carve them and then color them in with sharpie and then wipe them off with some denatured alcohol and then seal with finish.
