[difalkner]

What kind of wood and paint, Gary? I have sealed bare wood areas with Nitrocellulose sanding sealer or Shellac and then painted with no real issues. I've used both brush and spray (rattle can). I've used my air brush for small areas but usually seal them first.

David

 

[difalkner]

Not sanding primer, Nitrocellulose sanding sealer - clear, like I use on a clear lacquer finish. One will do it, or has. I suppose you could do two to make sure since it doesn't take long to dry.

David

 

[difalkner]

This is about the only photo I have that shows something where I used Nitrocellulose sanding sealer and then brushed the letters and sprayed the apple. I don't see any bleeding in the photo and don't recall any when I did this.

David