Router Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
hi, im looking for advice on how to paint a baltic birch plywood canopy to surround a gas range cooker it needs to be moisture resistant and to resist slight heat.
many thanks
paul
 

·
Registered
Joined
·
23,786 Posts
Hi Paul

I would recommend a good coat of base primer to seal the plywood then 2 coats of High Gloss Latex Enamel so you can clean up quick and easy, :) after you get done with the paint job and when you cook around the new canopy.

Bj :)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top