Router Forums banner
1 - 1 of 1 Posts

·
Registered
Mike
Joined
·
3,945 Posts
Paul not having pictures to see your results makes it hard to give you an answer but small lettering is often problematic. Using v-bits would probably be the best way to go but I also recommend making the lettering as large as possible.

One more thing to look at would be just using "uturnhandles" because most people would search using what is written on the item and that would lead to your site, your YouTube videos, your Amazon listing and other places listing your handles.

It looks like you might be able to go with Arial Black 3.5 to 4.0 long by 0.4 high using a 90 deg v-bit. You will probably still have some clean up around the edges because of the soft plastic maybe a quick touch with a torch or fine sand paper.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top