Router Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Need to replace power cord but can't get head off to do it. Have removed the two long screws that hold everything together according to schematic. Also removed two screws above the fan assembly and the brushes. The head is still firmly attached to the main body. No screw on the head cap itself as on the newer routers
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top