Router Forums banner
1 - 1 of 1 Posts

· Registered
Paul
Joined
·
2,169 Posts
I'm not familiar with that router but I have run into the brushes holding onto the commutator when disassembling tools, especially where they've carved a rut in the comm. Remove the brushes if you haven't already. The only other thing I see is the 'Ring' #209 (C-clip thing).
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top