Hi group from new member! Have materials coming to build 22 x 22" phenolic router table with Shopsmith 520 (front and rear) extruded rails so I can lock table into Shopsmith system and use the 520 rip fence for quick dados. Aluminum Bench Dog Router Plate to hold Porter Cable 892 2-1/4 HP router. Will also use a Freud fence placed for precision (front-to-rear fence) and optional (left-to-right oriented fence) which will permit unlimited table space, if required.
Table will be constructed utilizing 3/4 x 22 x 22" phenolic with a front and rear 3/4 x 3/4 x 22" bolster rail epoxied or glued to bottom of table surface. This will better facilitate placement of thread inserts for mounting Shopsmith rails. Total cost including Freud fence inside of $400.
I could use a suggestion for bonding phenolic pieces together. Suggestions?
Jim
Lillian Alabama
Table will be constructed utilizing 3/4 x 22 x 22" phenolic with a front and rear 3/4 x 3/4 x 22" bolster rail epoxied or glued to bottom of table surface. This will better facilitate placement of thread inserts for mounting Shopsmith rails. Total cost including Freud fence inside of $400.
I could use a suggestion for bonding phenolic pieces together. Suggestions?
Jim
Lillian Alabama
