Router Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
132 Posts
Discussion Starter · #1 ·
Hay Reible,, How does one put a photo with his name on the post,
Thank you much Learning Herb :p
 

·
Registered
Joined
·
41 Posts
It's the "Avitar". Under User Profile you can download or choose from existing.
Only limit is it cannot be bigger than 80X80 pixels.
 

·
Registered
Joined
·
1,702 Posts
Learning Herb said:
Hay Reible,, How does one put a photo with his name on the post,
Thank you much Learning Herb :p
Hi Herb,

I'm not sure what you are asking..... Do you want to add a photo in with the text or as an attachment or just post it in the "Gallery" and reference it here???

(Anyway maybe on of the kind "watchers" could move this thread to the "Off Topic Discussion" area and I will try and answer it after Herb gives me a bit more information.)

Ed
 

·
Registered
Joined
·
132 Posts
Discussion Starter · #4 ·
Yes Ed. I want to kinow how you put the little photo under your name when you post a note,every body has those little photos.yours looks like a star.
And to make this post fit in the tool forum.I say this did you see the new slot cutter router bit ,You can turn a knob and make the cut thicker or thinner.Thay have twt sizes ,One that goes up to 1/4 in. and one that goes up to 1/2 in. Thay are really neet. Learning Herb
 

·
Registered
Joined
·
1,702 Posts
OK then, yes that is the Avatar. To do this you click on the "User CP" along the top bar (far left). This take you to another page where you then look for "Edit Avatar" and click that.

As was mentioned it is limited in size so if you want it do your own you might have to shrink the image to fit. Mark has a large collection and taking one of those is fine too. I end up changing mine every little while and must have used maybe 20 different ones already since Sept. So what I'm saying is you can change this when ever you want and can use your own.

It should be somewhat clear once you get to the page but if you need help let me know I can do a step by step for you. Also if you don't have software to reduce the image you want to use message me and I'll help with that as well.

Ed
 

·
Registered
Joined
·
1,702 Posts
Learning Herb said:
Yes Ed. I want to kinow how you put the little photo under your name when you post a note,every body has those little photos.yours looks like a star.
And to make this post fit in the tool forum.I say this did you see the new slot cutter router bit ,You can turn a knob and make the cut thicker or thinner.Thay have twt sizes ,One that goes up to 1/4 in. and one that goes up to 1/2 in. Thay are really neet. Learning Herb
Hey Herb are you talking about the Amana EZ- thing? If so check here:
http://www.routerforums.com/showthread.php?t=303

Ed
 

·
Registered
Joined
·
132 Posts
Discussion Starter · #7 ·
Yes , thats it .looks great. but what do you think. Sometimes looks are deciving.
Learning Herb
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top