Router Forums banner
1 - 12 of 12 Posts

·
Registered
Joined
·
536 Posts
Discussion Starter · #1 ·
My daughter asked for two plant stands that she wanted to donate to her church. So I hustled to get them made by Easter. Years ago I made 20 or 30 plant stands, but my mind was rusty on how I made them.

I made these out of mahogany. The columns are 24" tall and as usual I applied Zar oil-base polyurethane diluted with 50/50 paint thinner mineral spirits.

While I was working with the mahogany I decided to make my daughter a basket and had two hummingbirds engraved on it. Actually I made another basket out of tiger maple with hummingbirds which I will be shipping to a friend.

Malcolm / Kentucky USA
 

Attachments

·
Registered
Joined
·
4,380 Posts
Good Stuff!! Those stands don't just have to be used for plants. They could be used to display or show off most anything.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top