Router Forums banner

plate layout

1784 Views 1 Reply 2 Participants Last post by  Woodnut65
what is the best way to mount the router to the router table plate?....I got the Bosch fixed base to install, and would like a little plate is from Eagle America so it isn't cut for anything now.....tks for help...Dennis
1 - 2 of 2 Posts
Hi: remove the sub base from your bosch router and use it as a template to drill the holes required in the eale plate. make sure that your router plate is dead centered on the eagle before you drill. Counter sink the holes and fasten the router to the new plate. Good luck Woodnut65
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.