Joined
·
23,171 Posts
Posts by DesertRatTom
1 - 3 of 14 Posts
Joined
·
23,171 Posts
Nice work. I'm not a CNC guy, although very interested. Here is a string that may be extremely helpful as you consider a business. I like my Laguna tools, great engineering, hold up well.
One member here, Gaffboat (Oliver Henry) has published a couple of good beginner books, one going through the terminology (lots of it), the other on design, which will be very important. They are published under Prof. Henry's byline, available on Amazon. Here are pix of the covers.
![397023]()
![397024]()
One member here, Gaffboat (Oliver Henry) has published a couple of good beginner books, one going through the terminology (lots of it), the other on design, which will be very important. They are published under Prof. Henry's byline, available on Amazon. Here are pix of the covers.
Joined
·
23,171 Posts
Just realized I forgot to put the link to the post, making a nice living with a CNC. Well worth the read and a lot of good information that should help you get rolling.
www.routerforums.com
Making a nice living with CNC
With the surge in interest in CNC on the Forum, I thought it was time to post some information on how to make serious money with one, other than craft shows and sharing profits online and in consignment shops. This orignially was posted in response to a couple just about to take the plunge, but...
www.routerforums.com
1 - 3 of 14 Posts
