Joined
·
2 Posts
I found information on the post found at the following link that indicates there are adjustments that can be made to the guide posts on a PRL-V2 router lift. Can anyone please tell me where and how these adjustments can be made? My lift is pretty sticky when I have the router mounted, pretty smooth without router. I need to try to loosen the clamping pad but I don't see how the pads can affect the lift mechanism. Either way I would like info on these post adjustments Thanks!
Quote from post found at link below:
" I ended up having loosen the two guide posts and reseat them. This seems to have fixed the issue and the lift is now working very smoothly."
www.routerforums.com
Quote from post found at link below:
" I ended up having loosen the two guide posts and reseat them. This seems to have fixed the issue and the lift is now working very smoothly."

PRL-V2 Router Lift
I've got a PC7518 & PRL-V2 router lift. So far, so good. I'm building a cabinet to set the top onto. Still good, lots of learning on this first project, but still good. I need to get the router lift mounted in the top, which, by the way, is a double layer of 3/4" Birch ply. I'm confusing...