[bobj3]

Hi Mike

Here's just some of the ones I use. I have added 6 more not in the snapshots

=====

I have just been looking on the internet at Push Sticks. It would be interesting to see what people with 10 digits use. I like the look of the Vermont American Push Shoe Plus, not that it is available in the U.K. But a plywood version of it soon may be. What is the best you lot can offer?

 

[bobj3]

Hi Mike

You have a sharp eye, it took me a bit to find it the picture

Can't have to many push sticks

=====

I have spotted a Vermont Push Shoe Type in pic 2. What a variety!

 

[bobj3]

Hi

I like the GRR-Ripper also but I have found a way that's works better for me, it's the OP hold downs, you can be cutting a board up and just walk away and the board will not take off like a rocket , I now use it on all the table saws.. along with a push stick.



=========

 

[bobj3]

Hi

Yep, it works great they sale the sanding disk (7" to 12" with the hole in the center ) but I'm cheap so I make my own.


=====

Does the sandpaper on the blade really work???

 

[bobj3]

Hi Derek

Most rip saw blades put the mark on the stock and with the sanding disk it's gone.

I did post the mfg. of the sanding disk on the forum but I will need to did it up.but here's a link to some sanding disk that work the same way..

eBay Store – Stockroom Supply: Search results for.

here's some snapshots of the sanding disk
http://www.routerforums.com/66823-post19.html


==========