Router Forums banner
1 - 1 of 9 Posts

· Registered
5 Posts
Hi there,
All wood will react to varying temperatures/moisture content and by laminating both surfaces you will balance the reaction. If only one surface is laminated, the other surface will have a different expansion/contraction rate.
Admittedly, with hard wood the movement is less and in a stable workshop probably minimal. My router fence is made from oak and not laminated and shows no signs of movement at all and the table is veneered MDf simply sealed and edged with oak and it is still true.
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.