Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
387 Posts
The panel bits with the back cutter, allows you to raise the panel without it being proud of the stile and rail when the door is assembled. I use CMT, and Freud, I also
have a set from Oak Park, they all work just fine. A matched set is probably the way to go since you can often get a deal on them.

Hope this helps. Woodnut65
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top