Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
16 Posts
Rasied Panel Doors

jce,

If you are going to band a plywood panel with enough solid stock to be able to panel profile it, remember that when you do so, you will have the top and bottom profiles with grain running different than that of the panel. This can be a dead giveaway as to what you have done. It will look like the cabinet doors when particle board center doors first came on the market.

Jim
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top