Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,323 Posts
I can remember how difficult that was. I ended up making a kind of lasso out of rope and putting it around the vice, then pulling it gradually tighter while starting the threads into the nut. There was no one around to help, so I used a clamp attached to the bench to tie the rope to and hold the rope tight between tightening adjustments, which required several tries before success. It ain't easy!!!

Charley
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top