Router Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
888 Posts
Discussion Starter · #1 ·
I'm going to make some router skis and have Harry's plans. He had provided plans for the rods and I remember seeing them but now can't find them. I believe he threaded the ends of smooth rods. Can I use full threaded rods instead so I don't have to go through the threading process? I saw one comment concerning sag if the rods weren't strong enough but don't know what the weight of their router was. I have a DeWalt DW618 router
 

·
Registered
Joined
·
888 Posts
Discussion Starter · #3 ·
Thank You. I don't have a lathe to thread the ends of a smooth steel rod. I suppose I could just use threaded rod. Any thoughts on where/how to get the lathe work done? Metal working shop, maybe?
 

·
Super Moderator
John
Joined
·
6,962 Posts
Call a local machine shop or welding shop
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top