Router Forums banner
1 - 3 of 3 Posts

· Registered
1,702 Posts
tbwillia said:
I am being pressured by my wife to make some divided light cabinet doors. What bit would be best to make the dividing mullions with?
The only way I know of do this is to purchase a bit set for the project. They come in different sizes depending on wood thickness and of course different profiles. It is normal a 2 piece set and requires a 1/4" straight bit as well, so check some catalogs or some of the on-line sources.

For some sources check:

You did ask for Mullion but some people (not you of course) really want to have divided glass doors which is another thing and again I would use a matching bit set again.

Of course Bob and Rick might have some clever way to do it without but I don't know any other way to get a quality job then the bit sets.

1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.