Router Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
I posted in the General a few weeks ago about buying a router...I had a m12v that I used in an Eagle America table...I sold the router...mistake...in the market for another...and have a tool show comming up next Saturday, wanting to purchase a M12V or the new combo kit from Hatachi...after a few responses in the General fourm, sounds like the combo is a route to take...any comments here are appreciated...getting down to the wire and just think that the combo will provide a table mount and a plunge base...with the M12V, my problem was taking it in & out of the table to use...someone recommended using the fixed base in the table and the plunge base for freehand, makes sense once I read it....any help?...tks in advance...Dennis
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #5 ·
I have found a M12V for 129.99, this is new not used, it was 174.99 at local tool store, not sure what the tool sale price would be, but bet it isn't going to be 129.99...just have some concern about using as a table and free hand router, pulling in & out, but someone said they leave the plate installed and use it free hand with the plate mounted, I checked mine out and plate is pretty good size...any comments appreicated.....like the idea of the combo with the fixed base & plunge, but the price for this M12V is attractive also....Dennis
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top