Router Forums banner
1 - 1 of 15 Posts

· Retired Moderator
16,386 Posts
If it's one of the ones with a plastic ring that turns and adjusts height we've recommended using heat to at least 4 or 5 people that had ones that were stuck and all of them were successful. at getting it to turn. A hair dryer like Stick suggests will work given some time. If you use a heat gun use it on low power so that you don't damage the plastic. If that isn't the problem then a photo would help and you can post one from your own hard drive by using the Go Advanced post option.
  • Like
Reactions: roxanne562001
1 - 1 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.