Router Forums banner

1 - 5 of 5 Posts

·
Retired Moderator
Joined
·
16,385 Posts

·
Registered
Joined
·
376 Posts
The manual posted by Cherryville Chuck is dated 1996.

Might be worthwhile to bring the table top to a local Sears store to determine which -- if any -- of the current Sears routers fit.

As an aside, that router table reminds me of a one sold by Porter-Cable in the early 1990's .Had one and found it to be very light. I tightened the router mounting screws before turning on as it vibrated a great deal. Also mounted it to a piece of 3/4" plyw'd. for ease in clamping it to the bench/work table.
 

·
Super Moderator
John
Joined
·
6,941 Posts
Hello and welcome to router forum. Hammertime

If you plan on using this router and table a lot, you may want start with newer products,you could end up with a lot money of spend and not be very happy.
If it for occasionally use then you may want to buy used and make it fit
 
  • Like
Reactions: Ray Newman

·
Premium Member
Joined
·
2,413 Posts
Hi Hammertime. Welcome to our little corner of the 'net
 
1 - 5 of 5 Posts
Top