Hi Michael, welcome to the forum. Ive been doing wood working for a lot of years, as a hobby and as a business. I had a Delta cabinet shaper and stock feeder. If you do a lot of work, say making 25 or 30 cabinets it' s what you need. However, I also had a router and table, as well as a number of hand held routers. I have since retired and I sold the shaper, and a large planer that I had. I bought the Oak-Park system for the private jobs that I still do for friends and some old customers. Router bits should not be run at a slower speed as Mike pointed out it's not good for the work or the bit.
To accomplish what you are attemping to do, the router and table is what you will need. That being said, I suggest that you look at the Oak-Park router table, and some others before you make a decision. That's my 2 1/2 cents worth. Woodnut65
To accomplish what you are attemping to do, the router and table is what you will need. That being said, I suggest that you look at the Oak-Park router table, and some others before you make a decision. That's my 2 1/2 cents worth. Woodnut65
