Router Forums banner
1 - 1 of 31 Posts

· Registered
10,712 Posts
Michael, welcome to the forums. You really need to tell us more as to what you plan to use the equipment for. In my opinion, unless you intend to do big bunches of work, I would go with a router. You can get a 3 1/2 hp that will do the work and you will have more of a selection of bits to work with. The router with the MDF table will be more versatile than a shaper. IMHO.
1 - 1 of 31 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.