Router Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,702 Posts
FordPrefect said:
I have the table top and fence almost done, I just need to dress up the edges to make it look nice. Then I make the drawers, face frame the carcass and viola, I will have a new router table. Yes, I am slow :) but I am having a lot of fun making the table. Hopefully, by Sunday I can be taking photos.

I have a question about wax, Spacemanspiff. I have Minwax furniture paste, would that work the same way as your Briwax does for the table top and fence?
If you are trying to make a slick surface I would not use Minwax. Go with a hard wax, I like carnauba or a car paste wax.

Ed
 

·
Registered
Joined
·
1,702 Posts
FordPrefect said:
Do those waxes (car/boat) leave any residue on the wood?
The carnauba wax I use I use on the table saw, router table, jointer, bandsaw table, and about any other surface in the shop and as long as you don't leave any excess nothing appears on the wood. Put it on then polish it off.

Ed
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top