Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
22,228 Posts
One other option is this set of four plate levelers from Kreg. See pix. Used to be $20 a set, not sure of current price.

Caution. If your table is dense MDF, you must pre drill for any screws you put in. Drill size should be slightly smaller than the screw, just enough so the threads get a grip but you don't split the material. Same applies to the levelers. I've found you don't need to fasten the plate down, the weight of the router is enough to hold it steady.
Hand Arm Musical instrument Human body Sleeve
 
1 - 1 of 1 Posts
Top